The door frames of a house are one of the most important features of a home, both in terms of aesthetics and functionality. Architrave is the finishing touch that adds the much-needed elegance to door frames. It is essential for creating a smooth and polished look, as well as providing protection to the timber. Over time, the architrave may wear down, crack, or fade. If this happens, you may want to consider replacing it with new window architrave. In this blog post, we will guide you through the step-by-step process of installing door frame architrave, so you can make your home more beautiful than ever before.
Step 1: Choose Your Architrave
The first step to installing new door frame architrave is to choose the right material. Choose a material that matches the style and color of your home decor. The most common materials used for architrave are timber, MDF, and PVC. Timber architraves are more expensive, but they provide a better finish and can be stained or painted to match your door exactly. PVC architraves are affordable and low maintenance, but they don’t offer the same level of finish as timber architraves.
Step 2: Measure the Door Jamb
Before you start installing the architrave, measure the door jamb to determine the length of the architrave you need. Start from the top of the door jamb and measure down to the floor. Then, measure the width of the door jamb. Add an additional one-third of the width to the total length to ensure that you have enough material to cover the jamb.
Step 3: Cut the Architrave to Size
Using a saw, you can make the necessary cuts to the architrave based on the measurements you have taken. It is essential to take your time while cutting the architrave to ensure an accurate measurement. Additionally, use a mitre box to cut the architrave at the correct angle. It is recommended to cut at 45-degree angles for a better finish.
Step 4: Mark Out and Glue the Architrave
With your architrave cut into the desired size, it’s time to mark out where it needs to go. Carefully mark the corners and protrusions that are on or around the door frame. Then apply glue at the back of the architrave using PVA adhesive. Position the architrave onto the doorframe, starting from the top of the jamb and press firmly into place against the wall.
Step 5: Secure the Architrave into Place
Using small nails or pins, secure the architrave in place. The nails must be carefully hammered in under the surface of the wood. Fill the nail holes with wood filler and sand when it’s dried for a perfect finish.
Installing door frame architrave is a great way to add a touch of elegance to your home. Whether you are installing it for your house’s first time or replacing the existing one, if you follow the steps above closely, you will end up with a finished architrave that is perfect for your home. For assistance, make sure you consult an experienced professional to ensure your architrave is installed correctly. Get creative with your style and color choices and customize your door frame architrave to your heart’s content. Go ahead, and give it a try to upgrade the look and feel of your home.